DF ElectricalToronto & GTA
  1. Home
  2. Knob & tube / rewiring
  3. Etobicoke
Knob & tube replacement · Etobicoke

Knob & tube replacement in Etobicoke

Replacing knob and tube in Etobicoke's older homes — room by room, live-in friendly, with the paperwork your insurer wants.

Typical job
1–3 weeks
Live in during
Usually yes
From
$12,000
Utility
Toronto Hydro

Knob & tube replacement in Etobicoke: what to expect

Etobicoke still has houses running on knob and tube — mostly pre-1950 homes. Many insurers now decline or surcharge them, and the wiring was never designed for modern loads.

We rewire room by room while you live there: home-run circuits from the basement and attic, small planned openings elsewhere, power restored to occupied rooms at the end of each day.

When it's done you get the ESA Certificate of Acceptance and a completion letter for your insurer. Pairing the rewire with a 200 A upgrade saves a second permit and a second visit from Toronto Hydro.

Local notes: Etobicoke

Toronto Hydro coordination. Etobicoke is served by Toronto Hydro. Panel and service upgrades need a disconnect and reconnect from them, booked alongside the ESA permit.

Commercial strips and industrial parks. Retail along Bloor West and The Queensway, and industrial units around Rexdale and the airport corridor: fit-outs, LED retrofits and maintenance.

Typical costs

ScopeTypical range
Toronto semi or row house, full rewire$12,000 – $22,000
Detached 2-storey, full rewire$18,000 – $35,000
Partial (remaining live K&T circuits only)$3,500 – $9,000
Aluminum pigtailing, whole house$1,800 – $4,000
Typical GTA ranges in 2026, for planning only. Your written quote is fixed after a site visit. Plaster and drywall patching quoted separately or by your contractor.

Where we work in Etobicoke

We cover all of Etobicoke, including The Kingsway, Mimico, New Toronto, Long Branch, Islington Village, Humber Valley, Alderwood, Rexdale, Markland Wood, Eatonville. Every job starts the same way: a site visit, a written fixed quote, then the work — permit included.

More on this service: Knob & tube / rewiring · Electrician in Etobicoke

Questions from Etobicoke

How much does knob and tube replacement cost in Etobicoke?

Typically $12,000–$22,000 for a semi or row house and $18,000–$35,000 for a detached two-storey; partial jobs cost less.

Can we stay in the house?

Usually yes — power is restored to occupied rooms each day.

Will my insurer accept the work?

You receive the ESA Certificate of Acceptance and a completion letter, which is what insurers ask for.

Knob & tube replacement nearby

Toronto · East York · Markham · Whitby · Oshawa · Oakville

Free written quote

Knob & tube replacement in Etobicoke? Flip it on.

Tell us what you need — a single circuit or a full fit-out. You get a written, itemized quote, and a straight answer on whether you need the work at all.

CallFree quote