DF ElectricalToronto & GTA
  1. Home
  2. Panel & service upgrades
  3. Etobicoke
Panel upgrades · Etobicoke

Panel upgrades in Etobicoke

200 A panel and service upgrades for Etobicoke homes — permit, Toronto Hydro booking and inspection handled, and in most cases the lights are back on before dinner.

Typical job
1 day on site
Power off
4–8 hours
From
$3,500
Utility
Toronto Hydro

Panel upgrades in Etobicoke: what to expect

Most homes we open up in Etobicoke are 1920s–40s lakeshore homes, post-war bungalows and 1960s–70s family homes. Older houses here are often still on 60 or 100 A services — fine when they were built, tight once you add central air, an EV and an induction range.

Service upgrades in Etobicoke need a disconnect and reconnect from Toronto Hydro. We file the ESA notification, book the utility, and on the day swap the panel, re-terminate every circuit and test before Toronto Hydro restores power — usually the same afternoon.

Adding a basement apartment is one of the most common reasons Etobicoke homeowners call us about their panel: a second household means a second set of loads, and often a dedicated sub-panel.

Local notes: Etobicoke

Lakeshore and The Kingsway. Older homes in Mimico, New Toronto, Long Branch and The Kingsway can still carry original wiring and undersized services. We see a lot of rewires and 200 A upgrades timed with kitchen or basement renovations.

Bungalow conversions. Post-war bungalows in Alderwood and Eatonville are frequently gutted and rebuilt inside or raised to a second storey — the right moment to replace the service and plan circuits for modern loads.

Typical costs

ScopeTypical range
100 A → 200 A, panel and meter base in same location$3,500 – $5,500
Includes new mast / service entrance or panel relocation$5,500 – $8,000
Fuse panel replacement (keeping 100 A)$2,000 – $3,200
Sub-panel for a basement, garage or addition$1,200 – $2,500
Typical GTA ranges in 2026, for planning only. Your written quote is fixed after a site visit. Utility-side charges, if any, are billed by the utility.

Where we work in Etobicoke

We cover all of Etobicoke, including The Kingsway, Mimico, New Toronto, Long Branch, Islington Village, Humber Valley, Alderwood, Rexdale, Markland Wood, Eatonville. Every job starts the same way: a site visit, a written fixed quote, then the work — permit included.

More on this service: Panel & service upgrades · Electrician in Etobicoke

Questions from Etobicoke

How long does a panel upgrade take in Etobicoke?

Usually one day on site with four to eight hours without power. Booking the Toronto Hydro disconnect typically takes one to three weeks.

Who handles the Toronto Hydro side?

We do. We book the disconnect and reconnect with Toronto Hydro and file the ESA permit — you don't need to call either.

Do all Etobicoke homes need 200 A?

No. If you're only adding an EV charger, load management can often avoid an upgrade. We'll calculate your actual load first.

Panel upgrades nearby

Toronto · North York · Scarborough · East York · Mississauga · Brampton · Vaughan · Thornhill

Free written quote

Panel upgrades in Etobicoke? Flip it on.

Tell us what you need — a single circuit or a full fit-out. You get a written, itemized quote, and a straight answer on whether you need the work at all.

CallFree quote